Халуун хайлмал цавууг тос түрхсэн цаасаар ороогүй юу?

2021/03/02

Хавтастай цаасхалуун хайлмал цавууерөнхийдөө тосолсон цаас гэж нэрлэдэггүй боловч мэргэжлийн нэр томъёог гаргах цаас гэж нэрлэдэг. Бүх төрлийн хатуу халуун хайлуулагч материалыг халуун хайлмал цавууны төрлөөс хамаарч суллах цаасаар боож боох шаардлагагүй.

      Ширхэг and strip халуун хайлмал цавууs do not need to be wrapped. They are only slightly sticky on the surface and will not stick together even if they are placed in a pile, so they can be boxed or bagged as soon as they are produced. Block hot melt adhesives are generally sticky on the surface. They must be wrapped in release paper before they can be packed out of the box. Otherwise, they will all stick together. It is difficult to put them into the glue oven one by one during use. Therefore, the block The халуун хайлмал цавуу, which is also called даралт мэдрэмтгий цавуу, гадаргуу дээр гаргах цаасаар ороосон байх ёстой.

       It is necessary to use release paper to wrap the халуун хайлмал цавуу, and the adhesive film also plays a role of protection and isolation. If it is wrapped with release paper, the халуун хайлмал цавуу needs to be torn off the release paper before use; if it is wrapped with adhesive film, the whole piece of халуун хайлмал цавуу can be directly put into the glue oven to dissolve, without having to worry about the thin surface. Glue film. The rubber particles and strips are in direct contact with the air, and the environmental quality should be paid more attention to when storing. Hot melt adhesives are not suitable for storage in dusty, violent sunlight or humid environments to avoid pollution or moisture. The water vapor is heated and vaporized into gas, and the gas will be eliminated with the glue if it can't disperse at once. There is no glue where the bubbles go. If there is no bubble to take up a larger space, it will affect the effect of the glue. To properly protect the халуун хайлмал цавуу, one more layer of release paper will provide an additional layer of protection, which will reduce the hot melt adhesive from impurities and moisture.